GEO5 软件

在线帮助

Tree
Settings
Program:
Language:

Bearing Capacity

The "Bearing capacity" frame displays the results from the analysis of foundation soil bearing capacity. The stress in the footing bottom (assumed constant) is derived from all verifications performed in the frame "Verification". The programs "Spread footing", "Spread footing CPT", "Pile" and "Pile group" then consider all verifications as load cases. In the program "Pile CPT", just normal load is used.

The frame contains the following analysis options:

  • Insert bearing capacity of foundation soil

The foundation soil bearing capacity is input. The eccentricity and bearing capacity analysis results are displayed in the right part of the frame. The "In detail" button opens a dialog window that displays a detailed listing of the results.

  • Analyze bearing capacity by program "Spread footing"

Pressing the "Run program Spread footing" button opens the program "Spread footing" which allows us to calculate the soil bearing capacity or settlement and rotation of the footing. Pressing the "OK" button leaves the analysis mode - the results and all plots are transferred into the program "Masonry wall". The "Spread footing" program must be installed for the button to be active. The overall length of the wall foundation is input.

  • Analyze bearing capacity by program "Spread footing CPT"

The procedure is identical as if calculating soil bearing capacity by the "Spread footing" program.

  • Analyze bearing capacity by program "Pile"

The procedure is identical as if calculating soil bearing capacity by the "Spread footing" program. The "Run program Pile" is available if the wall has a pile foundation (frame "Foundation"). Pile spacing s is input.

  • Analyze bearing capacity by program "Pile CPT"

The procedure is identical as if calculating soil bearing capacity by the "Pile" program.

  • Analyze bearing capacity by program "Pile group"

The procedure is identical as if calculating soil bearing capacity by the "Spread footing" program. The "Run program Pile group" is available if the wall has pile foundation with more then one pile (frame "Foundation"). Pile spacing s, the overall number of pile rows n and loading length l are input.

  • Do not calculate (pile footing)

The foundation soil bearing capacity is not calculated.

The program allows us to specify a shape of stress in the footing bottom.

Visualization of results can be adjusted in the frame "Drawing Settings".

Frame "Bearing capacity"

Try GEO5 software for free.