GEO5 软件

在线帮助

Tree
Settings
Program:
Language:

Verification of Rectangular Cross Section Made of Plain Concrete

The cross-section is rectangular, loaded by the bending moment M*, normal force N* (applied in the cross-section centroid) and by the shear force V*. The shear strength is provided by:

where:

for cross-sections with height smaller than 200mm

for cross-sections with height greater than 400mm

intermediate values are obtained using linear interpolation method.

fc' is limited to value 50MPa.

Strength of concrete cross-section subject to the combination of bending moment and normal force is derived from the following expressions depending on the normal force eccentricity e:

Where Nn is determined as the greater of:

for fc' < 55MPa is α1 = 0.85

for concrete with greater strength is

Interaction diagram N-M

Usage ratio of concrete cross-section subject to the combination of bending moment and normal force is determined as |0L| / |0R1| or |1L| / |1R2|. Where L is load, R1 is strength with prescribed eccentricity and R2 is strength with prescribed normal force.

Try GEO5 software for free.